Idiomas disponibles
Idiomas disponibles
Placing an elevated load
An elevated load requires special handling, be extra cautious. Before loading a truck or trailer, make sure its wheels
have been chocked to prevent movement during operations.
1. Approach the loading area slowly, aligning
the forklift and the load. When the load is
properly aligned set the park brake. Fig 7.
2. Raise the load high enough to clear the stack
or platform. Align the forks to the correct an-
gle and height for load placement. Move for-
ward slowly making adjustments as needed,
until the load is properly aligned. Lower the
load into a stable position. Fig 8.
3. Make required adjustments to the forks to
properly clear the load. Check traffic release
the park brake, place the forklift into reverse,
and back out slowly.
4. After clearing the load, lower the forks and
side shift the mast to center as needed.
5. Check traffic; back away slowly. Travel with
caution at all times.
30
Bright Forklift
BD3–7570
Load Handling Instructions
Fig 7
Fig 8
