Sylvania SRT2232X Manual Del Propietário página 4

Idiomas disponibles

Idiomas disponibles

V-CHIP SET UP
V-CHIP enables parents to prevent their chil-
dren from watching inappropriate material on
TV.
V-CHIP reads the ratings for programming
(except for news and sports programs, unedit-
ed movies on premium cable channels, and
Emergency Broadcast System signals), then
denies access to programming if the program's
rating meets or exceeds the limitations you
select. In this case, "PROTECTED PRO-
GRAM by ..." message appears on the TV
screen.
To block certain ratings, follow the steps
below.
Programming may be rated by the Motion
Picture Association of America (MPAA) or
according to the Television Parental
Guidelines. In order to block any inappro-
priate programming, set your limits in both
places (MPAA RATING and TV RATING).
You cannot access the menu when the
"PROTECTED PROGRAM by ..." message
appears. In this case, change to an
unblocked channel, then press the MENU
button.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu
display appears on the
TV screen.
PICTURE
2) Press the CH(annel) ▲
CHANNEL SET
or ▼ button to point to
[ENGLISH] ESPAÑOL
B V-CHIP SET UP
"V-CHIP SET UP".
CAPTION [OFF]
TV SOUND [MAIN]
Then, press the
VOL(ume) ▲ button.
3) Use the number buttons
to enter 4-digit access
ACCESS CODE
code. The default
_ _ _ _
access code is 0000. If
you have not set up
your personal access
code, you should use
0000.
TV RATING
4) Press the CH(annel) ▲
B MPAA RATING
or ▼ button to point to
CHANGE CODE
"MPAA RATING".
Then, press the
VOL(ume) ▲ button.
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV's POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
Closed Caption Problem
My TV is showing captions that are
misspelled.
My TV will not show the text in its entirety
or there is a delay of what is being said.
My captions are scrambled with white
boxes on the TV screen.
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
My TV screen shows a black box on certain
channels.
As an E
S
®
Partner, our company has determined that this product meets
NERGY
TAR
the E
S
®
guidelines for energy efficiency. E
NERGY
TAR
5) Press the CH(annel) ▲
or ▼ button to point to
your desired item.
Then, press the
VOL(ume) ▲ button to
select [BLOCK] or
[VIEW].
<Selection>
<Rating Category Explanations>
• G:
General Audience
• PG:
Parental Guidance suggested.
• PG-13:
Unsuitable for children under 13
• R:
Restricted; under 17 requires
accompanying
parent or adult guardian
• NC-17:
No one under 17 admitted
• X:
Mature audience only
When you select the rating category and
turn it to [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the
lower rating will turn [VIEW] automatically.
When you turn "G" to [BLOCK] or
[VIEW], the all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "X" to [VIEW], then all rat-
ings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Use the number buttons
to enter 4-digit access
code. The default access
code is 0000. If you
have not set up your
personal access code,
you should use 0000.
4) Press the CH(annel) ▲
or ▼ button to point to
"TV RATING". Then,
press the VOL(ume) ▲
button.
5) Press the CH(annel) ▲
or ▼ button to point to
your desired item.
Then, press the
VOL(ume) ▲ button to
select [BLOCK] or
[VIEW].
Possible Remedy
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
You are in the TEXT mode. Select CAPTION mode or CAPTION
[OFF].
S
®
is a U.S. registered mark.
NERGY
TAR
<Selection>
B G
[VIEW]
Explanations>
PG
[VIEW]
• TV-Y:
PG-13
[VIEW]
R
[VIEW]
• TV-Y7:
NC-17
[VIEW]
X
[VIEW]
• TV-G:
• TV-PG:
• TV-14:
• TV-MA:
When you select the rating category and turn
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or
[VIEW], then all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "TV-MA" to [VIEW], then
all ratings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[V-CHIP SET UP SUB RATINGS]
When you select TV-Y7, TV-PG, TV-14, or TV-
MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-
PG) and turn it to [BLOCK] or [VIEW], the
sub-ratings (example: V for Violence) will turn
[BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or
[VIEW] individually when the rating category
is set to [BLOCK]. To set the sub-ratings indi-
vidually, follow the steps below.
When you select [TV-Y7]:
Press the CH(annel) ▲
ACCESS CODE
or ▼ button to select
_ _ _ _
"FV" (Fantasy Violence).
Then, press the
VOL(ume) ▲ button to
select [BLOCK] or
[VIEW].
B TV RATING
MPAA RATING
When you select [TV-PG], [TV-14] or [TV-
CHANGE CODE
MA]:
Press the CH(annel) ▲
or ▼ button to select
"D" (Suggestive
Dialog), "L"(Coarse
B TV-Y
[VIEW]
Language), "S"(Sexual
TV-Y7(
) [VIEW]
Situation), or "V"
TV-G
[VIEW]
(Violence). Then, press the VOL(ume) ▲
TV-PG(
) [VIEW]
TV-14(
)
[VIEW]
button to select [BLOCK] or [VIEW].
TV-MA(
) [VIEW]
Note: When you select [TV-MA], "D" does
not appear on the TV screen.
MAINTENANCE
CABINET CLEANING
Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
SUPPLIED ACCESSORIES
Remote control unit
(N0147UD)
Batteries ("AA" x 2)
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
Closed Caption
System:
Channel coverage
VHF:
UHF:
CATV:
Tuning System
Channel access:
Terminals
Antenna input:
S-Video input:
Video input:
Audio out/input:
Stereo Sound System
2 speakers
ELECTRICAL SPECIFICATIONS
The sub-ratings which
<Rating Category
set to [BLOCK] appear
Appropriate for all children
next to the rating catego-
Appropriate for children seven and
ry in the TV RATING
older
menu.
General Audience
Parental Guidance suggested.
[V-CHIP ACCESS CODE]
Unsuitable for children under 14
To change access code, follow steps.
Mature audience only
1) Press the MENU button,
then press the CH(annel)
▲ or ▼ button to select
V-CHIP SET UP. Press
the VOL(ume) ▲ button
to continue.
2) Press the number but-
tons to enter your old
access code. If you have
never set up your per-
sonal access code, use
0000.
3) Press the CH(annel) ▲
or ▼ button to select
CHANGE CODE. Then,
press the VOL(ume) ▲
button to continue.
4) Use the number buttons
to enter your desired
access code in the NEW
CODE space. Then,
enter the same code in
the CONFIRM CODE
space. Your new access
code is set. You will
return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does
not match the code in the NEW CODE space,
TV-Y7
[BLOCK]
repeat step 4, making sure you enter the same
B FV
[BLOCK]
new code exactly in the CONFIRM CODE
space.
NOTES:
• If a power failure occurs, the default code,
0000, will be the active access code again.
• If you connect the power cord to an AC out-
let that is controlled by a wall switch, your
TV-PG
[BLOCK]
personal access code will be erased every
time you turn off the power at the wall
D
[BLOCK]
L
[BLOCK]
switch. The default code will be the active
S
[BLOCK]
code again.
V
[BLOCK]
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to default
code, 0000. To restore 0000 as your personal
access code, unplug the TV's power cord for 10
seconds, then plug it in again.
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
Owner's Manual
(0EMN02277)
Sound output:
OTHER SPECIFICATIONS
NTSC-M
Remote control:
TV Standard
Operating
§15.119/FCC
temperature:
2 ~ 13
Power requirements: AC120V, 60Hz
14 ~ 69
Power consumption
2 ~ 13, A ~ W,
(Maximum):
W+1 ~ W+84,
Picture tube:
A-5 ~ A-1, 5A
Dimensions:
181 channel
frequency synthesized
tuning system
Weight:
Direct access keyboard,
programmable
scan and up/down
•Designs and specifications are subject to
change without notice and without our
VHF/UHF/CATV
legal obligation.
75 ohm unbalanced
•If there is a discrepancy between languages,
(F-type)
the default language will be English.
Mini DIN 4-pin jack
RCA connector x 2
RCA connector x 6
B TV-Y
[VIEW]
TV-Y7(
) [VIEW]
TV-G
[BLOCK]
TV-PG(DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA( LSV) [BLOCK]
PICTURE
CHANNEL SET
[ENGLISH] ESPAÑOL
B V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ACCESS CODE
_ _ _ _
TV RATING
MPAA RATING
B CHANGE CODE
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
Owner's
Manual
3W, 8 ohm x2
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
134W
32"
H : 26-3/8" (670.5mm)
W: 29-15/16" (760mm)
D : 21-1/4" (540mm)
112.6 lbs. (51kg)
loading