Idiomas disponibles
Idiomas disponibles
No.
Description
MOB (Man Overboard) key. A long press positions a Man Over Board waypoint at
1
the vessel's current position
2
Unit under command LEDs. Indicates which display the OP40 is controlling
DISPLAY key. Use short presses to toggle through displays that are configured for
3
OP40 control. A long press turns the OP40 to configuration mode.
PLOT/MARK key. A short press activates the Plot menu, a long press positions a
4
waypoint at the vessel position
5
IN / OUT key. Zooms radar, echosounder and chart panels. Adjusts audio volume
GOTO/VESSEL key. A short press activates the Goto menu, a long press centers
6
the chart to vessel position
P
7
key. Activates/confirms current selection
8
Rotary knob. The function of the knob is depending on active context
9
X key. Cancels changes and returns to previous menu level
Cursor keypad. Used to move the cursor on the display, and to maneuver in the
10
menu system
WIN key, used on multiple panels pages. A short press toggles between the
11
panels, a long press expands active panel to a full page panel and back again
MENU key. A single press displays the menu for the active panel/overlay. A
12
second press displays the settings menu
Direct Access Keys (DAK). Provide direct access to a page. Repeated presses of
13
each DAK cycles through all pages that relate to the DAK
Power / Brightness key. A short press activates the dialog used to adjust
14
brightness, change day / night illumination and set the unit in standby mode
STBY/AUTO key. Switches the system to Standby mode if the autopilot is active.
15
Displays the autopilot dialog if the autopilot is not active
16
Alpha numeric keypad used for entering numbers and text in dialog boxes
EN
| 5
