Idiomas disponibles
Idiomas disponibles
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
E N G L I S H •
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
CORDLESS SCREWDRIVERS
SAFETY RULES FOR SCREWDRIVERS
• Only use accessories that are in optimal con-
dition.
• Hold the tool by its insulated gripping sur-
faces when performing any operation where
the tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make ex-
posed metal parts of the tool "live", and shock
the operator.
• Don't get distracted while operating, stop
the cordless hammer drill before turning your
attention to other tasks.
• Do not use damaged or bowed drill bits.
• Keep hands away from rotating parts.
SAFETY RULES FOR CHARGER
• Before using the charger, read all the instruc-
tions and cautionary markings on the charger
and battery pack as well as the instructions on
the battery pack.
• Only charge your battery pack indoors as the
charger is designed for indoor use only.
DANGER: If the battery pack is cracked or
damaged in any other way, do not insert it in
the charging base. There is a danger of electric
shock or electrocution.
WARNING: Do not allow any liquid to come
into contact with the charger. There is a dan-
ger of electric shock.
• The charger is not intended for any use other
than charging the exact type of rechargeable
battery pack as supplied with the charger. Any
other use may result in the risk of fire, electric
shock or electrocution.
• The charger and battery pack supplied with it
are specifically designed to work together. Do
not attempt to charge the battery pack with
any other charger than the one supplied.
• Do not place any object on top of the charger
as it could cause overheating. Do not place the
charger near any heat source.
• Pull on the plug to disconnect it from the
power source. Do not pull on the lead.
U se r 's m a nu a l
9
