Toro 20332 Manual Del Operador página 11

lever forward until the button on the lever pops up
(Figure 15)
1. Bag-on-demand lever (in bagging position)
• For recycling the grass and leaf clippings, press the
button on the lever and move the lever rearward
until the button on the lever pops up.
Important: For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening (Figure 16) before you move the
bag-on-demand lever from one position to
another.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury. Also, an open
rear discharge area could allow small stones
and other similar debris to be thrown in the
operator's or bystander's direction and result in
serious personal injury or death to the operator
or bystanders.
Stop the engine and wait for all moving parts to
stop before cleaning the bag-on-demand door
and the surrounding opening.
Figure 15
1. Clean here
Side-discharging the Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the mower and the bag-on-demand
lever is in the bagging position, move the lever
to the recycling position (refer to Operating the
Bag-on-Demand Lever).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
11
Figure 16