12
F
unction of each Button
WATER TEMPERATURE
BUTTON (OPTION)
• Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT
COLD
respectively.
Default setting is COLD.
STAIN LEVEL BUTTON
• This button allows you to select the
strength of the water current.
• Power option selections light up in
sequence as follows NORMAL ‹N
STRONG ‹N GENTLE ‹N NORMAL
as the button is pushed. This can be
selected for any program, but when
washing jeans, it starts with Strong.
• Adjustment can be made while
washing.
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
• Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
• WATER LEVEL is automatically selected for FUZZY
(normal) program.
The following settings are indicated as the button is pushed
LARGE
LARGE . EX-LARGE
SMALL
SMALL MEDIUM
MEDIUM LARGE
LARGE
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button is
pushed.
• The following settings are indicated as
the button is pushed 3
...11
12
48
3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 22)
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
EX-LARGE
• Alarm indication -When an error occurs, an error
MEDIUM
message appears to indicate the abnormality.
For example,
4
5
14
16
...46
is indicated.
indicates that the lid is open.
Wash. Rinse. Spin button
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the remaining
time is displayed.