HTW IX80 Manual De Usario E Instalación página 41

Introduction for buttons on remote controller
5
TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. "
to exit turbo function and "
6
▲/ button
● Press "▲" or "
Holding "▲" or "
change quickly. On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (Temperature can't be adjusted under
auto mode)
● When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting
TIMER ON, TIMER OFF or CLOCK, press "▲" or "
to CLOCK, TIMER ON, TIMER OFF buttons)
7
SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and "
8
TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit's display. The setting on
remote controlleris selected circularly as below:
● When selecting "
on indoor unit displays set temperature.
● When selecting "
displays indoor ambient temperature.
● When selecting "
displays outdoor ambient temperature.
Note:
● Outdoor temperature display is not available for some models. At that time, indoor
unit receives "
" icon is displayed on remote controller. Press this button again
" icon will disappear.
" button once increase or decrease set temperature 1
" button, 2s later, set temperature on remote controller will
" icon will disappear.
no display
" or no display with remote controller, temperature indicator
" with remote controller, temperature indicator on indoor unit
" with remote controller, temperature indicator on indoor unit
"signal, while it displays indoor set temperature.
" button to adjust time. (Refer
11
.
" button to