Important Operating and Safety Information:
When using electrical appliances, the following basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury.
Read all instructions before using this heater.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may
cause fire, electric shock, or injury.
Before connecting the appliance to the electric source, check that the current and power match those given on
the ratings plate.
This heater is for use with a 120 Volt electrical outlet. The cord has a three-prong grounded plug, which must
be used in a properly grounded three-prong outlet.
Avoid the use of an extension cord since the extension cord may overheat and cause a risk of fire, however, if
you must use an extension cord it has to be a grounded No. 16 AWG minimum size and rated for not less than
1875 watts.
Do not run the cord under carpet. Do not cover cord with throw rug, runner, or similar items. Cord should be
placed away from traffic areas to prevent tripping hazard.
Never use the cord to pull the appliance.
Never leave the appliance unattended while it is in use.
Turn controls to "off" before removing plug from outlet.
Always unplug heater when not in use.
Do not use outdoors.
Only use heater on even and stable surface to prevent the appliance from tipping over.
To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, such
as a bed, where openings may be blocked.
Do not use in rooms in which highly flammable materials such as gas, paints, gasoline, solvents, etc. are
stored.
Keep minimum distance of 3 feet between the heater and curtains and other flammable materials.
Do not place the appliance or the plug in water or any other liquid. Should the appliance accidentally fall into
water, unplug the appliance immediately and have it checked by a qualified person before using it again.
Do not use the appliance with wet hands, on a damp floor, or when the appliance itself is wet.
The appliance must not be used if the glass is damaged.
Do not operate any heater with a damaged cord or plug, after the heater malfunctions or has been dropped or
damaged.
The warm air vent becomes very hot during operation—do not touch. During operation, only touch the
appliance's switches and handles.
The appliance should not be moved when hot. Never touch the hot parts with your bare skin.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric
shock or fire, or damage to the heater.
Please turn off the unit manually when leaving/not in use for extended period.
Please turn off the unit manually when the power goes out.
Please BEWARE that the plug may become hot.
7 |
SAVE THESE INSTRUCTIONS
