Idiomas disponibles
Idiomas disponibles
WiFi Indicator Status
The Wi-Fi indicator
is
blinking
The Wi-Fi indicator
is
blinking with long break
in between
Before first use
1
Remove all packing material.
2
Remove any stickers or labels (if available) from the appliance.
3
Thoroughly clean the appliance before first use, as indicated in the cleaning chapter.
The Kitchen+ App
Your Philips Airfryer is WiFi enabled and allows you to connect with the NutriApp to gain the
full Airfryer experience. Within the App you can select your favorite recipes, send it to the
Airfryer and start it from your smart device. You can start, monitor and adjust the cooking
process on your smart device from wherever you are, even if you are not at home.
Connecting your Airfryer to the App
1
Put the plug of the Airfryer in the wall outlet.
2
Make sure that your smart device is within reach of your home WiFi network before you
start the easy WiFi set-up process.
3
Download the Philips Kitchen+ App on your smart device from the App store or
from https://www.usa.philips.com/c-e/ho/philips-kitchen-app.html, follow
the registration process and select the connected Airfryer in your profile under "My
Appliances".
4
Follow the instructions in the App to connect your Airfryer to your Wi-Fi and to pair your
Airfryer.
5
When the WiFi LED on the user interface of the Airfryer is solid on, the Airfryer is
connected.
Note
• Make sure to connect your Airfryer to a 2.4 GHz 802.11 b/g/n home WiFi network.
• The easy WiFi set-up is needed to connect the Airfryer to your home WiFi.
• The pairing process is to connect the Kitchen+ App with your smart Airfryer.
• The WiFi setup process can be cancelled via the App or by unplugging the Airfryer.
• You can pair only one smart device at the same time to your Airfryer. If a second user
starts the pairing process, the first user is kicked out and has to pair again the next time
when cooking with the Airfryer.
• To start the pairing process, long press the temperature down button and follow the
instructions in the App, or start it from the settings in the Kitchen+ App.
• Either the Airfryer is in the "set-up" mode during the WiFi set-
up process. The screen shows three dashes and the buttons
on the Airfryer are inactive; or if it was already connected, the
blinking LED is an indication that the Airfryer is in the process of
connecting to the home WiFi.
• The WiFi functionality of the Airfryer has defect. You can either
use the Airfryer without the connectivity features, or you can call
the Philips service hot line or contact the Consumer Care Center
in your country.
ENGLISH
11
