Genius Audio GDSP-15404A Manual Del Usuario página 32

Idiomas disponibles

Idiomas disponibles

GENERAL PRECAUTIONS
To avoid product damage and possible injury, read this manual and
follow all installation instructions. This product has been checked for
correct operation before shipment and is guaranteed against
manufacturing defects.
Before beginning installation, disconnect the negative battery
terminal to avoid product damage, fire and / or injury.
Install the product in a dry place, with enough air for adequate
cooling of the equipment. The processor must be secured to a solid
mounting surface using appropriate mounting hardware. Before
mounting, carefully examine the area around and behind the
proposed installation location to ensure that there are no electrical
cables or components, hydraulic brake lines, or any part of the fuel
tank located behind the mounting surface. Failure to do so can
result in unpredictable damage to these components and possible
costly repairs to the vehicle.
Use only the supplied connectors or an easy plug cord for
connecting the product. Using other cables can cause damage to
the amplifier, the unit's master / radio, or the connected speakers!
Before installation, plan cable routing to avoid any possible damage
to the wire harness. All wiring must be protected against possible
crushing or pinching hazard. Also, avoid cables near potential noise
sources, such as electric motors, high-power accessories, and
other vehicle route harnesses.
STATEMENT
This user manual is for use and operating guide only, not as the basis
for maintenance services. Because this product keep updating
continuously, we reserve the right final explanations on product
changes, such as design, specification parameters without prior
notice. Please refer to the actual product, and the photos or designs
in this manual for reference only.
GDSP-15404A
Genius CarAudio
3
loading