Assembly - Base - GLIDEAWAY Lifestyle Serie Manual De Instrucciones

ASSEMBLY – BASE
It is HIGHLY recommended to use at least two people for the installation of this product.
To assemble, please perform the following steps:
1
2
To Control Box
Locking Clips
3
4
7
Carefully lift the base frame from the
shipping carton, keeping the unit top-
side-down. Remove the plastic wrapping
from the bottom to access the base.
Insert the end of the DC cord into the
power supply. Insert the other end with
locking clip into the Control Box cord.
Lock the Control Box cord using the
locking clip.
Insert the AC cord into the power supply.
IMPORTANT: DO NOT PLUG THE BASE
INTO THE AC OUTLET YET.
Insert the legs into the threaded holes
at each corner of the base by inserting
the leg and rotating clockwise until tight.
There must not be any gap or wobble
in the leg in order to avoid risk of injury
or damage to the base which may void
warranty.
Note: If setting two Twin XL bases to
use with one king size mattress, connect
the Sync cable to the control box (as
pictured) to one base. After bases are
arranged, connect the Sync Cable to the
other base's control box.
Also see note on the bottom of the next
page for connecting the speakers.