Hansgrohe Talis C 141271 Serie Instrucciones De Montaje / Manejo / Garantía página 2

2⅛"
10 mm
⅜"
2¼"
1¼"
O.D.
This unit is listed by IAPMO for use in
the USA and Canada.
This unit meets or exceeds the following:
• ASME A112.18.1
• CSA B125.1
• ICC/ANSI A117.1
2
4"
1¼"
1¼"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet may be used with a continuous flow
water heater if the flow pressure is at least 20
psi.
This faucet includes filters which
must be used as they protect the
faucet from debris in the water.
Failure to install the filters
may result in unsatisfactory
performance of the faucet.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Tools Required / Outiles Utiles
/ Herramientas Útiles
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.3 GPM
1⅜"
1⅝"
10 mm
19 mm