Idiomas disponibles
Idiomas disponibles
USE
Device overview
1 - Function key (ON/OFF)
2 - USB A Out
3 - Type C In/Out
4 - microUSB In
5 - Status LEDs
Operation
1. Function key (ON/OFF)
By briefly pressing the key, the current battery status is displayed through the LED lights and the
Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is fully charged, the
Powerbank changes automatically into standby mode after a time interval of approx. 30 seconds.
2. LED Status display
The current charge status of the Powerbank is displayed via the status LEDs when charging or
discharging the Powerbank.
% Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB A to Type C cable with the Type C connection (Type C In/Out) of
the Powerbank and connect the opposite end of the USB cable with the Standard USB Port of a
computer or USB power supply. You can also use a USB A to microUSB cable to charge the
Powerbank through the microUSB connection (microUSB In). Always use only one of the two
charging options, the Type C port (Type C In/Out) or the microUSB port (microUSB In)! The char-
ge process and the current charge status is signalled by the LED status lights. If the Powerbank is
fully charged, the LED status lights are lit permanently. The required charging time of the Power-
bank is dependent on the selected charging source and its output power (max. 5V / 2.1A).
1
2
LED 1
LED 2
EN - Page 3 of 7
3
4
LED light
LED 3
5
LED 4
