R
DECK RELEASE
LEVER
Figure 4-6.
Deck Release Lever
4.14
ADJUSTING THE HEIGHT ADJUST
PEDAL
1.
Position the seat to the desired location.
2.
While in the operator's position without the engine
running, push down on the height adjust pedal to
check for full function control.
3.
The height adjust pedal can be located in three (3)
different positions for operator comfort and control.
See Figure 4-7.
HEIGHT ADJUSTMENT PEDAL LOCATIONS
Figure 4-7.
Height Adjust Pedal Locations
4.15
ADJUSTING THE STEERING LEvERS
1.
Position the seat to the desired location.
2.
While in the operator's position with out the engine
running, move both steering levers forward and
reverse to check for full function control and comfort.
3.
If adjustment of the steering levers is needed, use
the following instructions to adjust.
A. Loosen the tension knob on the lever assembly.
B. Rotate the steering lever forward or backward to
achieve the optimum operating position.
C. Tighten the tension knob and repeat on the opposite
side.
390S0151-1
D. While in the operator's position, bring the steering
levers out of the neutral lock position and check to
make sure both levers are even before operating.
390S0140-2
18
ROTATE
LEvER
TENSION
KNOB
Figure 4-8.
Adjusting Steering Levers
Section 4
TENSION
KNOB
