Idiomas disponibles
Idiomas disponibles
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that can
cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when the
cable is damaged while working. Damaged cables increase
the risk of an electric shock.
Residual risks
Even when the power tool is used as prescribed
it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with
the power tool's construction and design:
-
Damage to lungs if an effective dust mask is not worn.
-
Damage to hearing if effective hearing protection is
not worn.
-
Damages to health resulting from vibration emission if
the power tool is being used over longer period of time or
not adequately managed and properly maintained.
WARNING!
This
electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their
physician and the medical implant manufacturer before
operating this machine.
4
power
tool
produces
DECLARATION OF CONFORMITY
Business name of the manufacturer:
INTERSKOL POWER TOOLS S.L.
12
Full address of the manufacturer
Ctra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Name and address of the person
(established in the Community) compiled
the technical file:
Jordi Carbonell, Santiago López
Ctra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Product name: Drill
Commercial name: Drill
Model: DI13/820GE2, DI16/1000GE2,
DI16/1050GE2
Type: Electric power tools
Serial Number: see label of the tool
Fulfils all the reevant provisions of
Directives
an
2004/108/EC, 2012/19/EC, 2002/95/EC,
2009/251/EC
We hereby declare, under our sole
responsibility,
brand
manual DI13/820GE2, DI16/1000GE2,
DI16/1050GE2 comply with the following
standars of standard documents:
EN60745-1, EN60745-2-1, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3.
Jordi Carbonell
We reserve the right to make technical changes 02/2014
2006//95/EC, 2006/42/EC,
FELISATTI
that
the
products
described
in
Santiago López
this
