Section 2 - Installation
Step 1
Place the baseplate at the desired location, assuring that it is at least 20cm from the ceiling. Make
sure the screw is facing up and the holes are level. Use a pencil to mark the holes.
Step 2
Using a 6.35 mm drill bit, drill two 25 mm deep holes over the pencil marks. For a plaster, drywall,
or concrete wall, insert the plastic anchors to support the screws first.
Step 3
Place the baseplate over the holes. Use the supplied screws to attach the baseplate to the wall.
D-Link DCS-8600LH User Manual
Getting Started
Mounting the Camera
1
2
3
10
