Idiomas disponibles
Idiomas disponibles
5. Install the Universal Adaptor
l
Suction Fitting
to the Pump inlet with a Hose and one Clamp on each end.
2
7. Tighten all the Clamps
to prevent water leakage.
q
4
10
9
9. Vent the Pump: to release the air trapped inside and make sure a
smooth water flow, it's important to vent or depressurize the Pump
before each use. Simply twist counterclockwise to loosen the Vent
Screw
, and the water pressure will force all the trapped air out.
e
Retighten the Screw when water starts flowing out.
14
onto the Suction Fitting
, and connect the
2
10
9
12
6. Connect the Return Fitting
and one Clamp on each end.
6
28
9
Before Using the Pump
8. You can now fill the pool with water up to the FILL LINE.
Do NOT plug the Pump in at this point.
10. To optimize water circulation, twist the RF Diverter
down and away from the Suction Fitting.
OWNER'S MANUAL
to the Pump outlet with another Hose
6
Inside Pool Wall
360°
so that it faces
7
11
