nedis WIFIDS10WT Guia De Inicio Rapido página 4

1. Download, install and launch the app "Nedis
SmartLife" from the Apple App Store or Google Play
Store on your mobile device.
2. Create a new account or log in to your existing
account.
3. Tap "+" to add the device.
4. Select the correct product from the list.
5. Place the batteries (2x AA, alkaline) into the battery
compartment.
6. Press the test button 3 times in 2 seconds.
7. When the LED is turned on, confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
10. Mount the device to the mounting plate. Refer to the
illustrations for the correct positioning of the device.
11. Test the alarm. Refer to the section "Testing the
alarm".
Recommended installation locations *)
Area
Living room
Dining room
Kitchen
Bathroom / Toilet
Bedroom
Hallway
Attic
Basement
Garage
Boiler room
*) The installation requirements may differ per region.
Contact your local authorities for possible additional
requirements.
Yes No
X
X
X
X
X
X
X
X
X
X
Use
LED indicator
The LED indicator will
Normal
flash red once every
operation
40 seconds.
The alarm will
sound and the LED
Smoke/heat indicator will flash red
detection continuously until the
smoke or the heat is
eliminated.
The alarm will beep
Low-battery shortly every 40
warning seconds and the LED
indicator will flash.
The alarm will beep
Defect shortly every 40
seconds.
Testing the alarm
The alarm must be tested weekly to ensure correct
operation. If the alarm test fails, replace the smoke
detector.
• Press and hold the test button for 5 seconds. The
alarm will sound.
• Release the test button.
Hush function
If the alarm sounds falsely due to cooking, the alarm can
be paused for 10 minutes by pressing the test button.
The LED indicator will flash every 8 seconds. Locate the
source of the alarm before using the hush function in
order to make sure that it is not a life-threatening
situation.
4
English
---
Eliminate the smoke
or the heat.
Take one of these
actions:
• Replace the battery.
• Press the test button
to pause the alarm
for 8 hours.
Replace the device.