Product Safety
IMPORTANT
READ CAREFULLY BEFORE USE! KEEP FOR FUTURE REFERENCE!
Training
WARNING! Automatic lawnmower! Keep away from the machine! Supervise children!
•
Read the instructions carefully. Be familiar with the controls and the proper use of the machine.
•
Never allow people unfamiliar with these instructions or children to use the machine. Local regulations may
restrict the age of the operator.
•
The operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
•
Ensure the correct installation of the automatic perimeter delineation system as instructed.
•
Periodically inspect the area where the machine is to be used and remove all stones, sticks, wires, bones,
and other foreign objects.
•
Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or
damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
•
On multi-spindle machines, take care as rotating one blade can cause other blades to rotate.
General
•
Never operate the machine with defective guards, or without safety devices, for example deflectors and/or
grass catchers, in place.
•
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
•
Never pick up or carry an machine while the motor is running.
•
Remove (or Operate) the disabling device from the machine
-
before clearing a blockage;
-
before checking, cleaning or working on the machine.
•
Do not leave the machine to operate unattended if you know that there are pets, children or people in the
vicinity.
Maintenance and storage
•
Keep all nuts, bolts, and screws tight to be sure the machine is in safe working condition.
•
Check the grass catcher frequently for wear or deterioration.
•
Replace worn or damaged parts for safety.
•
Ensure that only replacement cutting means of the right type are used.
•
Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
•
In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into
contact with the eyes, etc.
•
Servicing of the machine should be according to manufacturers' instructions.
EN
5
POWERWORKSTOOLS.COM