Read this first
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide for
future reference.
Legal considerations
Audio surveillance can be regulated by laws that
vary from country to country. Check the laws in your
local region before using this product for surveillance
purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at axis.com/patent and one or more
additional patents or pending patent applications in
the US and other countries.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate all
applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX
are registered trademarks of Axis AB in various
jurisdictions. All other trademarks are the property
of their respective owners.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 2 .
•
Low Voltage Directive (LVD) 2014/35/EU. See
Safety on page 3 .
•
Restriction of Hazardous Substances (RoHS)
Directive 2011/65/EU and 2015/863, including
any amendments, updates or replacements. See
Disposal and recycling on page 3 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact information on page 3 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended environment.
USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference,
and
2.
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
Contact information
Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
Canada
This digital apparatus complies with
CAN ICES-3 (Class B). The product shall be
connected using a shielded network cable (STP) that
is properly grounded. Cet appareil numérique est
conforme à la norme CAN NMB-3 (classe B). Le produit
doit être connecté à l'aide d'un câble réseau blindé
(STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class B limit of EN 55032.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class B limit of
