Interface Description; Main Interface - TECshow HALO 80 LED Manual De Usuario

port a weight of 10 times of the unit's weight. Also
always use a safety cable that can hold 12 times of
the weight of the unit when installing the fixture.

3. INTERFACE DESCRIPTION

Main Interface

Chinese/English
surface
Control Setting
Option
1CH. Pan
......
15CH. Frost
16CH. Reset
17CH. Pan/Tilt Speed
18CH. Color Wheel Speed
P. 4
Tecshow Halo 80 LED - English version
Reverse 180
displayed
DMX
Address
System
Information
0-255 Yellow arrow indicates selected, Press "OK" key en-
ter into Edit status, the word is red, then press "UP"
0-255
"DOWN" to select, press "OK" save and Exit edit status.
0-255
Press "OK" to see the confirmation dialog box, press
"OK" again to enter the reset interface, all motor reset
0-255 Channel Mode is"Extended 20-channel" can display
0-255
The equipment must be fixed by professionals. And
it must be fixed at a place where is out of the touch
of people and has no one pass by or under it.
Subinterface
Manual Control
(1)Yellow ar-
row indicates
selected
(2) Press "OK" key enter into Edit
status, the word is red, then press
"UP" "DOWN" to select, press "OK"
save and Exit edit status.
This interface is used to control the current lumi-
naire and automatically enters the host state (does
not receive the DMX signal and sends a DMX signal
to the slave to the host).
The manual menu will display 16 channels or 20
channels according to the standard 16-channel or
extended 20-channel mode set in the setup menu.
Description