Glacier bay HD873X-3601 1003421410 Guía De Uso Y Mantenimiento página 10

Installation (continued)
7
Installing the shower arm
□
Wrap thread sealant tape around the pipe
threads of the shower arm outlet (1, not
included), as shown. Screw the connector (A)
into the pipe inside the wall. Insert the shower
arm (B) into the connector (A) and tighten the
set screw (P) with the Hex wrench
(Hex: 3.2mm, O) provided.
□
Wrap thread sealant tape around the pipe
threads of the tub spout outlet (2, not included)
in a clockwise direction, as shown.
□
Connect the tub spout outlet pipe (the tub
spout outlet pipe should project 4-5/16 in. from
the nished wall) to the lower pipe elbow (3, not
included). Tighten the elbow and tub spout outlet
pipe connections with a strap wrench.
O
P
B
1
A
3
2
4-5/16 in.
2
Wall
8
Installing the tub spout
□
Wrap thread sealant tape around the pipe
threads of the tub spout (J) outlet in a clockwise
direction, as shown.
□
Thread the tub spout (J) onto the threaded
connection in a clockwise direction until the tub
spout (J) becomes ush with the nished wall.
□
Use the strap wrench to tighten the tub spout (J).
J
10