Idiomas disponibles
Idiomas disponibles
This product requires assembly.
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
PACKING LIST
Dethatcher
Upper Handle Section
Center Handle Section
Lower Handle Section
Hardware Bag
Owner's Manual
WARNING: If any parts are damaged or missing, do
not operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
If any parts are damaged or missing, please call
customer service at 1-800-633-1501 for assistance.
WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious personal
injury.
WARNING: Do not attempt to modify this product or
create accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
HANDLES ASSEMBLY
Insert the lower handle (A) on both sides into the
handle holders and secure them tightly by using
two ST4.2*13 screws (one for each side). ( Fig.2)
A
ASSEMBLY
Align the holes on lower (1) and center
handles (3).Thread the handle bolt (2) into the hole
and secure the handles with a wingnut (4).
Repeat on the opposite side. ( Fig.3)
Fig.3
Install the upper handle (1) onto the assembled
center handles (3).
Align the holes on upper handle with the holes on
center handles. Secure the handles with bolts (2)
and wingnuts (4). (Fig. 4)
Fig.4
Fig.2
6
Model DT71212
3
4
1
1
2
4
1
