Ultenic D5 Serie Manual Del Usuario página 12

How Robot Clean Your Home
Auto Cleaning
Press the button on robot or press the
" "
start auto cleaning.
If the battery is low while the cleaning is not finished, the robot will return to the
charging dock for charging.
Warm Tips:
During the recharging process, there may be a phenomenon that the charging
dock cannot be found. At this time, the robot will flash red light and "BEEP" four
times. Please manually put the robot onto the charging dock to charge.
Spot Cleaning
When you select spot cleaning, robot intensely cleans a localized area by
spiraling outward about 3 feet (1 meter) in diameter and then spiraling inward to
where it started. During spot cleaning, robot boosts vacuum power to ensure the
best cleaning performance for what you need. To use spot cleaning, place robot
on top of the localized debris and press
Power levels
· When the robot vacuum cleaner is in sweeping mode, press this button to
adjust the suction power;
· When the robot vacuum cleaner is in sweeping and mopping simultaneous
mode, press this button to adjust the suction power;
· When the robot vacuum cleaner is in mopping mode, press this button to
adjust the speed of the water output.
button on remote control to
" "
(Spot) on the remote control.
" "