Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
STEP 1 - UNPACK AIR
CONDITIONER
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
•
Remove packaging materials. Save the carton and the foam
packaging for storing the air conditioner when not in use.
NOTE: There are NO packing materials inside the
air conditioner to remove—Do Not open the cabinet.
•
Properly dispose of/recycle all packing material.
•
Handle the air conditioner gently.
•
Keep the air conditioner upright and level. Do not set the air
conditioner on its side, front, back or upside down.
STEP 2 - INSTALL EXHAUST
NOZZLE TO MAIN WINDOW PANEL
1. Hold the main window panel so that the L-shaped edges
of the panel are facing you.
A
2. Align the exhaust nozzle with the slots in the opening, and
then insert and slide the nozzle to access the hole from the
back of the main window panel.
A
B
3. Turn the main window panel over, so that the nozzle is away
window panel to the adapter.
NOTE: On a dual hose unit, install the smaller hose
nozzle to the left-hand hole in the panel.
A
STEP 3 - INSTALL MAIN WINDOW
PANEL AND EXTENSION PANELS
NOTE: Depending on the size of your window opening, use
the main panel and one or both of the extension panels.
1. Open the window and place the main window panel into
the window.
NOTE: The window assembly is designed to
accommodate either a vertical slide or horizontal slide
window.
L-Shaped
A
Edges
2.
window as shown.
Main
A
3. Depending on the number of extension panels used, use
Window
Panel
extension panel(s).
Exhaust
B
Nozzle (1 or
2 depending
on model)
NOTE: There are many window types on the market
today. Use the foam strips and brackets (provided) to
secure the extension panels that ll the window opening.
4. Place the two top window brackets and two bottom
window brackets where they will best support the
extension panels.
Flat
A
Screw
5
Vertical Slide Window
Main Window Panel
A
A
Horizontal Slide Window
A
NOTE: Some window installations may require the
extension panels to be trimmed.
Before Assembly
Main Window Panel
A
