Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation (continued)
DRAINAGE
The tailpipe (not supplied) previously installed to the drain can now be connected to your household plumbing . In some cases, your
household plumbing will have to be modified to ensure proper drainage. If so, please consult a licensed plumber to complete needed
modifications.
SUPPLY LINES (NOT INCLUDED)
Connect the supply lines to your home's water supply as per
manufacturer's instructions .
Open the hot and cold water supply valves and check to make
sure they have been installed to appropriate inlet ports . Check
for leaks . Run hot and cold water uninterrupted for about one
minute to remove any residue from the lines .
Maintenance
CARTRIDGE REPLACEMENT
1 .
Turn off the water supply to the faucet at the nearest
shut-off valve .
2 .
Remove water indicator and make note of its color
orientation .
3 .
Unscrew the screw using the hex key .
4 .
Remove the handle .
5 .
Unscrew the cartridge nut .
6 .
Remove the old cartridge .
7 .
Insert the new replacement cartridge .
8 .
Install the cartridge nut . Do not over-tighten .
9 .
Install the cap . Do not over-tighten .
10 .
Install the handle and secure it with the screw .
11 .
Insert the plastic indicator back into the handle with the
colors oriented as previously noted . Red is normally on
the left .
QL292
Cartridge
Faucet body
10
Water indicator
Screw
Cap
Nut
Handle
Capítulos
Tabla de contenido
