Domo DO2420 Manual De Instrucciones página 30

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
PARTS
1.
Observation window
2.
Glass tray
3.
Safety interlock system
4.
Turntable drive
5.
Turntable ring
6.
Control panel
7.
Turning knob for the timer
8.
Turning knob for the power settings
9.
Protection cover wave guide - never
remove this cover!
BEFORE THE FIRST USE
TURNTABLE INSTALLATION
1.
First place the turntable ring in the centre of your microwave.
2.
Place the turntable on the ring. Make sure that the centre of the turntable is fit
properly on the turntable drive.
CAUTION:
·
Never place the glass tray upside down. The glass tray should never be restricted.
·
Both glass tray and turntable ring assembly must always be used during cooking.
·
All food and containers should be placed onto the glass turntable during cooking at all times.
·
If the glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service
center.
INSTALLATION
·
Check the oven for any damage, such as dents or a damaged door. Do not use the oven if it is
damaged.
·
Remove the protective film around the machine, this is applied to avoid scratches.
·
Choose a place to install the microwave, where there is sufficient open space for the air intake and
exhaust.
The microwave oven must stand at least 85 cm high. Make sure that the left, right and back side are at
least 10 cm from the wall or cupboard. The open space above the microwave must be at least 20 cm.
·
Never remove the feet from the underside of the oven.
·
Blocking the air intake and exhaust opening can lead to damage.
·
Place the oven as far as possible away from radio and TV, because the oven may cause reception
problems.
·
Plug the plug of your oven into the wall outlet, check that the voltage at home is consistent with that
indicated on the label of your machine.
·
Warning: Do not place the oven above a stove or other heat producing device. This may damage the
machine and void your warranty.
·
The accessible part of your machine may become warm during use.
30
DO2420
1
3
2
6
5
4
7
8
Waveguide
9
Cover
 
loading