Idiomas disponibles
Idiomas disponibles
EN
OPERATION
Before first use, it is recommended to operate the kettle for 2 to 3 times following the instructions below. This
will remove any dust or residues remaining from the manufacturing process.
1.
Place the power base on a dry, flat and stable surface.
2.
Open the lid by pressing the lid release button.
3.
Fill the kettle with cold water up to the MAX 1.0L marking.
4.
Close the lid by pressing it down until it clicks into place.
5.
Place the kettle on the power base and insert the plug into the mains socket.
6.
Press the power switch. The water is being heated.
The indicator light on the power switch will illuminate.
7.
The kettle will switch off automatically when the water has boiled.
The indicator light will go out.
You can stop the boiling process by setting the power switch to the 0 (Off ) position.
8.
Lift the kettle from the power base and then slowly pour the boiling water.
Cut-out for boil-dry protection
CLEANING AND DESCALING
down before cleaning.
Unplug from the socket before carrying out maintenance or cleaning.
•
Clean the exterior of the kettle and the power base using a damp cloth. Dry thoroughly.
•
Clean the interior of the kettle with a soft sponge and warm, soapy water. If your hand
the lid closed. Rinse any remaining soapy water from the kettle.
•
•
Do not use any abrasive or chemical cleaning agent.
•
Never immerse the kettle and the power base in water.
•
Regularly descale the kettle using a kettle descaler.
SPECIFICATIONS
Ratings: 220-240V~, 50/60Hz
1250-1500W
3
