MPM MCZ-105 Manual De Instrucciones página 21

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
- Ensure that children do not play with the appliance.
- Store the appliance and its cord out of reach of children under
8 years of age.
- Do not remove the plug from the mains by pulling by the cord.
- The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
- Do not plug the power cord with wet hands.
- Keep your children safe: do not leave any parts of the pack aging
readily accessible (i.e. plastic bags, cardboard boxes, polystyrene
inserts, etc.).
- WARNING! Never let children play with plastic film or bags.
Choking/ asphyxiation hazard!
- Never fill the kettle above the maximum level nor under the
minimum level – boiling water splashes are possible in case of
overfilled kettle
- Make sure if the kettle is turned off, prior to its positioning on
the heating base.
- The kettle lid must be closed in course of water boiling.
- Use the kettle with its associated base exclusively.
- Use the kettle for water boiling only.
- Do not touch the enclosure surfaces in course of water boiling,
this surface may be hot.
- If water gets into any electric elements inside the kettle or onto
the base, carefully dry these elements before plugging the kettle
to the mains.
- Do not operate the kettle when empty.
- Allow the kettle to cool completely before cleaning.
- Use the kettle with its associated filter only (option).
APPLIANCE OVERVIEW
1.
Housing
2.
Cover
3.
Button opening the lid
USING THE KETTLE
1. Before the first use, boil two full volumes of water in the kettle. Dispose of both volumes.
2. Remove the kettle from the power base (7) before filling with water.
3. Press the lid opening button (3) to open the lid and fill the kettle up to the desired level (no less
than 0.5 l and no more than 1.0 l). Close the lid carefully (2). Put the kettle on the power base (7).
Turn on the kettle with the On/Off switch (5).
4.
Kettle handle
5.
On/off switch
6.
Kettle base rotates 360º
EN
21
loading