Kohler K-T14419 Guia De Instalacion página 3

Faucet
Outlet
Port
Flange
Spout
Shank
Escutcheon
1. Install the Spout
IMPORTANT! Use care when installing the spout to avoid
scratching the finish.
Thread the spout into the spout shank until it is snug. If needed,
adjust the spout slightly to position it so it points straight down.
Secure the spout in place by tightening the flange with the screws
provided.
Confirm that the O-ring is inside the escutcheon.
Apply plumbers putty or other sealant to the back surface of the
spout escutcheon according to the putty manufacturer's
instructions.
Carefully slide the spout escutcheon over the spout and press
firmly against the finished wall.
Remove any excess putty or sealant.
Kohler Co.
Apply plumbers
putty.
Screws
O-Ring
Setscrew
3
Spout
1023411-2-B