Idiomas disponibles
Idiomas disponibles
C
onnecting Water Supply Hose
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check
for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
Water
tap
Rubber Packing
Water Supply Hose
Hose connector
Rubber seal
29
