RECOMMENDED LOADS
3
• The pulsator rotates for 8
seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used will
be shown and water will
be supplied.
4
4
4
4
Close the lid
5
• Water will be
• When the wash
supplied for 2
program ends, the
minutes after the
buzzer will ring for
start of the wash
10 seconds
to supplement
before the Power
the water the
goes off
laundry has
automatically.
absorbed.
6
6
6
6
Caution & Note
Finish
• If water is already in the tub, or
6
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
• With lightweight bulky loads,
WATER LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
• When setting the WATER LEVEL
manually, do not set to Medium to
7
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set to
cold automatically). Ensure that the
load is under 2 kg.
• In order to avoid damage to
laundry, the spin cycle may appear
slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
• When static pressure of water
7
is more than 2 kg/cm
QUICK WASH course will be
within 19 minutes.
7
7
Maximum
Load
Less than
14.0 kg
Less than
2.0 kg
, the
2
Less than
2.0 kg
Less than
14.0 kg
Less than
14.0 kg
17