Velleman HQ-Power HQDB10001 Manual Del Usuario página 6

Connection Diagram


V. 01 – 11/09/2018
HQDB10001/HQDB10002
C DMX controller
R receiver
On the last device, the DMX cable has to be terminated
with a terminator. Solder a 120 Ω resistor between
signal (-) and signal (+) into a 3-pin XLR plug and
connect it to the DMX output of the last fixture.
Switch on the terminator on the splitter if you do not
connect a device to the output.
O
I
6
output
input
©Velleman nv