Idiomas disponibles
Idiomas disponibles
WASHING CONDITION INDICATOR (OPTION)
• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows (Except Model: WF-T1407TP) :
If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing
time/strength, and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and
the LED turns to green.
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3
4
...11 12 14 16 ...46 48
3 HOUR.
• To cancel delay time, turn the
power switch off.
(refer to page 24)
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use TUB
CLEAN course to clean the tub. (Except Model: WF-T1407TP)
* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, the sen-
sor will still work. The sensor algorithm may differ according to models. (Except Model: WF-T1407TP)
* The control panel and
program name may differ
according to model.
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 8 different programs
for different kinds of laundry and dirtiness.
• program selections light up in sequence as follows:
5
FUZZY(Normal) WOOL QUICK WASH
JEANS SMART CLEANING or
EXTRA CLEANING
SILENT FAVORITE
TUB CLEAN FUZZY(Normal) etc.
Select the desired program by pressing the button.
WF-T1407TP Model has EXTRA CLEANING
program instead of SMART CLEANING
POWER(AUTO OFF)
BUTTON
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about
10 seconds after the wash is finished.
START/PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
15
