Idiomas disponibles
Idiomas disponibles
ENG
anyone while in use
►
impact-driver drill will produce vibrations
may gradually come loose, and possibly cause faults
or accidents
Keep your hands away from all moving
►
parts of the cordless impact-driver drill.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the cordless impact-driver drill after use
be hot and cause burns
with may contain chemicals or toxic components
Avoid inhaling these substances or allowing
►
them to come into contact with your skin
PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The cordless impact-driver drill has been designed
►
to drill, screw and unscrew
familiarize yourself with the cordless impact-driver
drill before use.
1
9
2
8
1. Chuck.
2. Switch.
3. Rotation selector.
4. Handle.
5. Battery.
6. Torque selector.
7. Gear selector.
8. LCD battery indicator.
9. LED lamp.
10. Belt clip.
USE INSTRUCTIONS.
Before starting up the cordless impact-driver
►
drill, we recommend that you carefully read all of
the instructions as indicated
regulations regarding the prevention of accidents,
health and safety directives, laws and applicable
When operating the cordless
The screws
►
Some materials worked
►
►
Refer to this plan to
►
Please respect all
►
restrictions for work places
driver drill must only be used by persons who have
been instructed in its use and only for the purposes
for which it has been designed.
POWER SUPPLY.
Make sure the power supply is adapted to the
►
requirements shown on the information panel of the
cordless impact-driver drill (1)
It may
►
voltage will make it operate slowly
performance and may cause the motor to overheat.
BATTERY AND CHARGER.
Use
If the battery housing is damaged, do not insert
►
it in the charger, as there may be a risk of electric
shock
►
work together, do not attempt to charge the battery
with any other model of charger
the charger to damp conditions
is designed for use with rechargeable batteries,
any other type of use may pose a fire risk or
cause electric shocks
from sources of heat
7
incorrect reassembly may increase the risk of fire,
explosion or electric shocks
6
to enter the charger, as they may cause electric
shocks
3
in temperatures higher than 40ºC
charger at a different voltage to that specified by the
manufacturer
4
under any circumstances
batteries, even when they are empty or broken, as
they may explode
air temperatures any lower than 4.5ºC or higher
than 40.5ºC to prevent damage
5
and battery may heat up during the charging
10
process, this is normal, and does not mean there is
a problem
does not produce enough energy in situations when
it previously did, do not use the battery in these
conditions
when it does not have a battery inserted.
BATTERY INSTALL.
To remove the battery hold the cordless impact-
►
driver drill firmly by the handle, press the battery
catch and remove it (2)
checking that the correct polarities are used (3).
CHARGING BATTERY.
Insert the charger plug into the battery
►
the charger to the power supply
hours to charge the battery fully at 20ºC
battery overheats as a result of direct sunlight or other
4
English
►
►
The charger and battery are designed to
Keep the charger away
►
Do not open the charger,
►
►
Do not store the charger or the batteries
►
The batteries must not be opened
►
Do not attempt to burn
►
Do not charge the batteries in
►
The battery must be recharged when it
►
Disconnect the charger from the mains
►
Insert the battery
►
The cordless impact-
Using the motor at low
This will reduce
►
Do not expose
►
The charger
►
Do not allow liquids
Never use the
►
Both the charger
►
Connect
►
IIt will take 1.5
►
If the
►
