Idiomas disponibles
Idiomas disponibles
Wear ear defenders
Wear safety shoes
Wear protective gloves
Wear close-fitting work clothes
4. Know your product
1. Saw blades (4pc)
2. Soleplate
3. Saw blade holder
4. Quick-change chuck
5. Locking handle for soleplate
6. Ventilation holes
7. Switch lock
8. ON/OFF switch
9. Battery pack
10. Display for remaining capacity
11. Push button for capacity display
12. Battery pack release button
13. Control lights
14. Battery charger
15. LED light
Scope of delivery
Safety and operating manual
Cordless reciprocating saw
4pc Saw blades
Battery pack
Charger
5. TECHNICAL DATA
MODEL NO.
Cordless reciprocating saw
Idling stroke rate
Stroke
Weight (without battery)
Max. cutting depth for wood
Max. cutting depth for metal
Noise output level (L
)
WA
Noise pressure level(L
)
PA
Vibration
GB
DT105036A
0-3000 min
-1
22 mm
1.7 kg
90 mm
10 mm
89 dB(A), K=5 dB(A)
78 dB(A), K=5 dB(A)
a
=10.75 m/s
2
hB
a
=9.96 m/s
2
h,WB
K=1,5 m/s
2
10
BATTERY CHARGER
Rated voltage
Rated power
Charge voltage
Charge current
Protection class
BATTERY PACK
Battery pack type
Rated voltage
Capacity
Charging time
NOTE:
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another.
The declared vibration total value may also be used
in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the
power tool can differ from the declared total values
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
6. ASSEMBLY
Only insert the rechargeable battery once the device
is completely assembled. If the device is switched on
accidentally, there is a danger of injury.
1) Installing/removing the saw blade
Caution! Risk of injury!
Do not use any blunt or bent blades or blades
which are damaged in any other way.
Always insert a suitable saw blade
Mounting the saw blade:
1. Turn the quick-change chuck (4) in the direction of
the arrow and insert the shank of the saw blade (1)
all the way into the slot of the saw blade holder.
The teeth of the saw blade must point downwards.
2. To lock, release the quick-change chuck (4) so that
it snaps back into the initial position.
3. Check that the saw blade is secure by pulling on it.
220-240V~, 50-60 Hz
70W
14.4-18 V
2.4 A
/ II
Li-Ion
Maximum 20 V
Nominal 18 V
4000 mAh
2H
(See Fig. A)
