HAMPTON BAY HBI-4192-WH-D Guía Para El Uso Y Cuidado página 8

Idiomas disponibles

Idiomas disponibles

Wiring Options (continued)
3
Controlling a motion sensing
light fixture(s)
IMPORTANT: Total fixture ratings must not exceed 360 Watts (3.0 A).
When wiring to control another motion sensing light
fixture (Primary / Controlled):
Strip the red wire in both light fixtures.
Connect the red wire of the controlling
(primary) fixture (A) to the red and black wires
of the controlled (controlled) fixture.
Connect all white wires together.
Connect all ground wires together.
4
Wiring motion sensing lights to
control each other
IMPORTANT: Total fixture ratings must not exceed 360 Watts (3.0 A).
When wiring so either motion sensor turns on both
motion lights (Primary / Primary):
Strip the red wire in both light fixtures.
Connect the red wire of one fixture to the red
wire of the second fixture.
Connect all white wires together.
Connect all black wires together.
Connect all ground wires together.
Operation
1
Setting the sensor for testing
NOTE: When the "ON-TIME" switch is set to the "TEST"
position, the light fixture will operate during the day or
night. The light will stay on for 5 seconds after all motion
is stopped.
Turn the power on at the circuit breaker or
fuse and turn on the wall switch.
Set the "ON-TIME" switch to the "TEST"
position.
Set the "DUALBRITE" switch to the "OFF"
position.
Turn the "SENS" (sensitivity) control to the "–"
position.
White to white
Black to
Primary
black
Light
Ground to ground
Wiring the motion sensing light
to control another motion sensing light
NOTE: In most installations, an additional wire (same
gauge as existing house wire) will have to be installed in
the house to connect the two fixtures as primary / primary.
White to white
Primary
Light
Ground to ground
Wiring multiple motion sensing lights
to control each other
NOTE: The motion sensor will need to completely warm
up (90 seconds) before beginning the setup process.
A
T
1 5 10
E
MINUTES
S
T
8
Controlled
Light
Red
to black
Black to red and black
Red
Primary
to red
Light
Black to black
+
SENS
OFF
3 6
DUSK
HOUR
TO
DAWN
loading

Este manual también es adecuado para:

Hbi-4192-bk-d10002485931000248617