LG WT17BSS6H Manual Del Propietário página 44

Symptoms
UE rebalancing operation is not
successful.
The load is too small.
Heavy articles are mixed with
lighter items.
The load is out of balance.
Control error.
Water level is too high due to a
faulty water valve.
The water level sensor is not
working correctly.
A motor error has occurred.
Clutch error.
Tub clean Alarm.
Sensor for cloth-sensing is
defective.
Motor's revolution is too low.
Contact-point of Connector is
defective.
CL is not an error. This prevents
children from changing cycles or
operating the appliance.
Reason Solution
• The automatic attempt to rebalance
the load was not successful. The
cycle has been paused to allow the
load to be manually adjusted.
• Add more items to allow the washing
machine to balance the loads.
• Wash articles of somewhat similar
weight.
• Manually redistribute the load if
articles have become tangled.
• Unplug the washing machine and wait 60 seconds. Reconnect power
and try again. If the error code is not
released, call for service.
• Close the water taps, unplug the
washing machine, and call for
service.
• Close the water taps, unplug the
washing machine, and call for
service.
• Allow the washing machine to stand
for 30 minutes and then restart the
cycle. If the error code is not
released, call for service.
• Unplug the washing machine and
call for service.
• Run the Limpieza de Tina
programme.
• Manually redistribute the load if
articles have become tangled.
• Unplug the washing machine and
wait 60 seconds. Reconnect power
and try again.
• To deactivate, press the Nivel de
Agua and Centrifugado buttons
simultaneously for 3 seconds.
EN
43