Idiomas disponibles
Idiomas disponibles
When using grease (lard or the
likes) in the solid state, the ther-
mostat must be set at minimum to al-
low it to melt slowly and gradually insi-
de the cooking compartment.
The maximum amount of oil / fat
(lard or the like) inside the con-
tainer must be: - for example
FRBE77A about 12kg / FRE...A(T)2V
about 6,5 kg / FRBE74AHP about 15
kg / FR(B)E94A about 16 kg
SWITCHING ON/OFF
The appliance must be swi-
tched on after having filled the
cooking compartment with oil/
grease. Do not switch it on when the
cooking compartment is empty. Do
not top up the oil/grease level while
the appliance is running.
During use, do not leave the
equipment unattended
When the operations described have
been performed successfully, do as
follows to begin cooking
MODEL WITHOUT DISPLAY - See
SECT. IMAGES - REF i).
The minimum temperature is ap-
proximately 100°C and the ma-
ximum temperature it can reach
is approximately 200°C.
Start the cooking procedure as follows:
1.Turn the knob to the desired posi-
tion (Fig. 3A). The indicator light "G"
indicate an operating phase.
2.Turn the knob to "Zero" (Fig. 3B) to
stop heat generation and to switch
the appliance off at the end of the
work cycle.
MODEL WITH DISPLAY - see ILL
sect. - REF o)
The temperature can be set from
0°C to 180°C
Start the cooking procedure as follows:
1. Turn the Functions Knob to the
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
INSTRUCTIONS FOR USE
Temperature symbol (Fig. 1A), the
green LED indicates a heating phase
(Fig. 1B).
2. Turn and press the Selection Knob
to choose the desired temperature
(Fig. 1C).
The MELTIN function (Slow hea-
ting) is activated up to 50°C. The
letters MEL are displayed alterna-
tely with the set temperature (Fig. 1D).
To display the current tempe-
rature, press the Selection
Knob (Fig. 1C)
3. Turn the Functions Knob to "Zero"
(Fig. 1E) to switch the appliance off.
OTHER DISPLAY FUNCTIONS /
TIMER FUNCTION / see ILL sect. - REF o)
To activate this option: 1. Turn the
Functions Knob to the Time symbol
(Fig. 1F)
2. Turn and press the Selection Knob
to set the desired temperature (from
01 to 99 minutes - Fig. 1C).
The countdown begins (Fig. 1D).
When the time is up, the word "END"
is displayed and three beeps can be
heard
Press the Selection Knob to re-
set the time set
3. Turn the Functions Knob to "Zero"
(Fig. 1E) to switch the appliance off.
PROGRAMS FUNCTION / see ILL
sect. - REF o)
- NEW PROGRAM / To save a program:
1. Turn the Functions Knob to the Pro-
grams symbol (Fig. 1G)
2. Turn the Selection knob (Fig. 1C) to
new program and press for 5 seconds
(see Fig. 1H). A beep will confirm the
selection.
3. Turn and press the Selection knob
to set: 1. Temperature / 2. Timer / 3.
Shaking Time (basket) / 4. Load com-
- 15 -
7.
EN
