Idiomas disponibles
Idiomas disponibles
Personal settings
The control panel can also be used to personalize the different extracted coffee capacity. The predefined factory
volume for the small cup is (20-25 ml) / and for the large cup is (40-50 ml).
•
Check whether there is drinking water in the water tank, check that the machine is ON. Wait until the buttons
on the control panel are "Ready for use".
•
Then press and hold any coffee button for 3 seconds until the coffee comes out, then release the button
(see figure). Once the coffee has reached the desired capacity, press the selected coffee button again and
the operation is complete.
•
The machine remembers the current personal setting and saves the same coffee quantity for the next time
unless new programming is defined.
Reset to factory settings
•
Make sure the machine is switched off without mains power.
•
Press both coffee buttons together for at least 3 seconds and connect the machine to the mains at the
same time.
Cleaning and maintenance
•
Remove the plug from the socket
•
Never immerse the appliance in water.
•
Only clean the device with a dry cloth.
•
Empty the drip tray and used capsule container after each use.
•
Clean the coffee nozzle and the inside of the machine regularly with a damp cloth.
•
Do not use a strong or abrasive solvent, sponge or cream cleaner. Do not put in the dishwasher.
•
For your coffee machine to work efficiently, you must regularly clean the scale deposits produced by the
water. We recommend that you use the appliance every three months or after approx. 200 capsules.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This
means that this product must be handled pursuant to European Directive 2012/19/EU in order to be
recycled or dismantled to minimize its impact on the environment. For further information, please
contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the
environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device ME-80, applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage
directive (2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the
backside of this manual
ENGLISH
