Idiomas disponibles
Idiomas disponibles
4. CONTROLS
Key
Function
A
Switches the motor off.
Keypad Lock Function
Long press:
Activates/deactivates the keypad lock for hood cleaning.
B
Turns the motor on at the first speed.
Long press when all loads are off (Motor+Light):
performs a saturated Filters alarm reset.
Signals the saturated Metal Grease Filters alarm and the need to wash
them. The alarm is activated after 100 hours of effective hood operation.
C
Turns the motor on at the second speed.
Long press when all loads are off (Motor+Light):
Activates/Deactivates the Activated Carbon Filters alarm.
Signals the saturated Activated Carbon Odour Filter alarm. The alarm is
activated after 200 hours of effective hood operation.
D
Turns the motor on at the third speed.
Long press:
turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. When the time is up, the system automat-
ically returns to the third speed.
E
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the Coupled Induction
Cooktop is turned on.
The induction cooktop can control the speed of the hood motor. The way the
speed is controlled depends on how the user set up the cooktop. Refer to the
cooktop manual.
When the induction cooktop is switched on, the hood lights are switched on
at maximum intensity. When the induction cooktop is switched off, the status
of the lights is not modified.
MULTICONTROL coupling
Long press when all loads are off (Motor+Light):
the procedure for associating the hood to compatible devices (induction
cooktop or remote control) is initiated. Up to 3 induction cooktops can be
paired and only one remote control. See the manual of the devices for details
of the operations that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised within
this time check that you have previously activated the procedure for the
devices to be coupled. The maximum number of linkable devices may have
been reached.
F
24h Function
Activates/Deactivates the motor in the 24h mode, a speed that allows suction
of 10 minutes every hour, for a 24-hour cycle.
Cannot be activated if the Intensive or Delay modes are active.
12
LED
The motor speed indication LEDs
go out.
All LEDs flash.
Fixed
All LEDs flash 3 times.
Flashing
Fixed
All LEDs flash twice:
alarm activated.
All LEDs flash once:
alarm deactivated.
Flashing
Fixed
Flashing
Fixed:
AUTO mode activated.
Off:
AUTO mode temporarily deactiv-
ated.
LEDs E, F, G and H flashing:
coupling in progress.
Upon successful completion of the
procedure, the LEDs E, F, G and
H are switched on for 2 seconds.
Flashing
