Tabla de contenido
1
Vista General
1.3.
Productos PreSonus complementarios
PreSonus Health, Safety, and Compliance Guide
Headphones
PreSonus Safety Warnings and Instructions
PreSonus Compliance Information
Electrical information and warning symbols for PreSonus products are located on the rear electrical panel of the unit
European Union (EU)
adjacent to the electrical plug or on the bottom of the unit along with other product compliance information.
The CE mark on this product indicates that the device is compliant with the
EU Council Directives
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
For a copy of a specific product DoC, contact PreSonus at [email protected].
WEEE This symbol on this product or its packaging indicates that this product must not be disposed of with other
waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-
collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling
insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE
in a manner that protects human health and the environment. For more information about where you can drop
ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
purchased the product.
important operating and maintenance instructions in the literature accompanying the appliance.
Radio and Television Interference
CAUTION: To reduce the risk of electric shock, do not expose this appliance to rain and moisture. Do not expose this device
If these symbols are marked on the product, the device complies as follows:
to dripping or splashing liquids and no object filled with liquids, such as vases, should be placed on the device.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
CAUTION: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock,
the equipment.
do not perform any servicing other than that contained in the operation instructions. Qualified service personnel must
USA: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
perform repairs.
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
1.
Read these instructions.
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. These limits are designed to provide reasonable protection against harmful interference in a
2.
Keep these instructions.
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed
3.
Heed all warnings.
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
4.
Follow all instructions.
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
5.
Do not use this device near water.
the following measures:
6.
Clean only with a dry cloth.
7.
Do not install near any heat sources, such as radiators, heat registers, stoves,
•
Reorient or relocate the receiving antenna.
or other device (including amplifiers) that produce heat.
•
Increase the separation between the equipment and the receiver.
8.
Protect the power cord from being walked on or pinched, particularly at plugs,
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
convenience receptacles, and the point where they exit from the device.
•
Consult the dealer or an experienced radio/TV technician for help.
9.
Use only attachments/accessories specified by PreSonus.
FCC Radiation Exposure Statement:
10. Unplug this device during lightning storms or when unused for long periods.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
11. Servicing is required when the device has been damaged in any way, such as if a power-supply cord or plug is
and operated with minimum distance 20cm between the radiator& your body.
damaged; or liquid is spilled, or objects have fallen into the device; or if the device has been exposed to rain
or moisture, does not operate normally, or has been dropped. All PreSonus products in the USA should be
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
serviced at the PreSonus factory in Baton Rouge, Louisiana. If your PreSonus product requires a repair, contact
CAUTION: Changes or modifications to this device not expressly approved by PreSonus Audio Electronics could void the user's authority to
[email protected] to arrange for a return authorization number. Customers outside the USA should
operate the equipment under FCC rules.
contact their local distributor. Your distributor's contact information is available at www.presonus.com.
Australian Compliance: This equipment complies with Radio communication Devices Notice 2003; or Radio communication
12. Protective grounding(earthing) terminal. The apparatus should be connected to a
Labeling (Electromagnetic Compatibility) Notice 2008; or Radio communication (Compliance Labeling Electromagnetic
mains socket outlet with a protective grounding(earthing) connection.
Radiation) Labeling Notice 2003.
13. Where the Mains plug or an appliance coupler is used as the disconnect device,
IC WARNING
the disconnect device shall remain readily operable.
14. The use of apparatus is in moderate climates.
IC RSS warning: This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may
15. Please allow 5cm around the apparatus for sufficient ventilation; the ventilation should not be impeded
cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users,
SPL Warning:
the antenna type and its gain should be so chosen that, the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to
This radio transmitter (identify the device by certifcation number, or model number if Category II) has been approved by Industry Canada
noise-induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of
time. The U.S. Government's Occupational Safety and Health Administration (OSHA) has specified the permissible noise level
to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna
type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
exposures shown in the following chart:
prohibited for use with this device.
IC Radiation Exposure Statement:
Duration (hours) per day
SPL (dBA)
Typical Example
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
8
90
Duo in a small club
co-located or operating in conjunction with any other antenna or transmitter.
6
92
ICES003: This CAN ICES3 (B)/NMB3(B) digital apparatus complies with Canadian ICES003.
4
95
Subway
3
97
2
100
Very loud classical music
1.5
102
1
105
0.5
110
0.25 or less
115
Rock concert
WARNING:
Cancer and reproductive harm - www.p65warnings.ca.gov
®
PreSonus Health, Safety, and Compliance Guide. Part# 70-50000015-A
© 2019 PreSonus Audio Electronics, Inc. All Rights Reserved.
18011 Grand Bay Ct. • Baton Rouge, Louisiana 70809 USA • 1-225-216-7887
www.presonus.com
PreSonus Health, Safety, and Compliance Guide
Headphones
1.3.
Productos PreSonus complementarios
Estuche de viaje de tapa dura
Guía de salud, seguridad y conformidad de PreSonus para auriculares.
¡Gracias por elegir Presonus! Como compañía de soluciones, creemos que la mejor
forma de cuidar a nuestros clientes (y ese es usted) es asegurarnos de que tenga
la mejor experiencia posible desde el comienzo de la cadena de señal hasta el
final. Con el fin de conseguir este objetivo, hemos priorizado una integración sin
fisuras durante toda la fase de diseño de estos productos desde el primer día.
El resultado son sistemas que se comunican entre sí como se había pensado—
nada más sacarlos de la caja—sin excesivas complicaciones de configuración.
Estamos aquí a su disposición. Descubra más cosas en www.presonus.com.
Eris HD10BT
Manual del Usuario
2
Tabla de contenido
