Idiomas disponibles
Idiomas disponibles
product is switched off automatically; battery may
be damaged
•
On/off 9
- Switch on fan by pressing the left or right side of the
switch (G) down.
- Switch off fan by pressing the raised side of the switch
(G) down.
•
• Powering the fan
- Power the fan with compatible SKIL battery packs.
- Use a USB power adapter and a USB-C cable to power
the fan via USB-C inlet port (E) q
! When the USB power cable is used, the battery
pack is automatically disconnected. The USB
power cable should be disconnected from the
power inlet port when not in use.
! If the switch is left in the ON position, the fan will
not restart when the battery pack is inserted.Turn
the fan OFF and then ON to restart it.However,the
fan will restart as soon as the USB power cable is
connected.
•
Adjusting the fan head (A) angle
- Pivot (horizontal angle) adjustment wa
300° (Leftward: 200°, Rightward: 100°)
- Tilt (vertical angle) adjustment wb
270° (Inward: 45°, Outward: 225° ) make sure the base
(D) is secure.
•
Mounting the fan e
Make sure that the supporting object is strong enough.
- Loosen the locking knob (C) COUNTERCLOCKWISE
to open the clamp.
- Tighten the knob CLOCKWISE to seure the fan in
place.
! Ensure the fan is securely clamped before and
during operation. Never stand directly beneath a
mounted fan.
! Be careful not to hang the fan in such a way that it
prevents normal fan operation.
MAINTENANCE / SERVICE
•
This product is not intended for professional use
•
Always keep product clean
! remove the battery or USB power cable from the
product before cleaning
- use clean cloth to remove dirt, dust, oil, grease, etc.
- Avoid using solvents when cleaning plastic part.
•
If the product should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the prodcut undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
•
Be aware that damage due to improper handling of the
product will be excluded from the warranty (for the SKIL
warranty conditions see www.skil.com or ask your dealer)
ENVIRONMENT
Only for EU countries
•
Do not dispose of electric tools, accessories and
packaging together with household waste material
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 5 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
Only for UK
•
Do not dispose of electric tools, accessories and
packaging together with household waste material
- in observance of on Waste Electric and Electronic
Equipment Regulations 2013 (SI 2013/3113), electric
tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility
- symbol 5 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
b
Ventilateur à pince sans fil
INTRODUCTION
•
Ce produit a été conçu pour assurer une ventilation
générale dans la plupart des applications de
refroidissement domestique et d'atelier.
•
Ce produit n'est pas conçu pour un usage professionnel
•
Lisez attentivement ce mode d'emploi avant d'utiliser
l'appareil et conservez-le pour pouvoir vous y référer
ultérieurement 3
•
Prêtez particulièrement attention aux consignes de
sécurité et aux avertissements ; sinon, vous risquez
de subir des blessures graves
•
Vérifiez que toutes les pièces montrées sur le schéma 2
sont contenues dans l'emballage.
Lorsque des pièces manquent ou sont endommagées,
•
contactez votre revendeur
DONNÉES TECHNIQUES 1
PIÈCES DE L'OUTIL 2
A
Tête de ventilateur
B
Pince
C
Molette de fixation
D
Socle
E
Port d'entrée USB-C
F
Bouton de niveau de batterie
G
Interrupteur bas/éteint/haut
H
Support de la tête de ventilateur
9.
__
J
*Câble d'alimentation USB
*Vendu séparément
SÉCURITÉ
MISES EN GARDE GÉNÉRALES
Lors de l'utilisation d'un appareil électrique, des précautions
élémentaires doivent toujours être respectées, parmi
lesquelles :
7
3163
