Idiomas disponibles
Idiomas disponibles
English
Package content
• KVM switch with USB and audio
• 2 x cable USB 3.2 A male to USB 3.2 B male, length ca. 1.5 m
• 2 x cable DisplayPort male to DisplayPort male, length ca. 1.5 m
• 2 x cable 3.5 mm stereo jack male to 3.5 mm stereo jack male, length ca. 1.5 m
• 1 x selector with cable, length ca. 1.8 m
• External power supply
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware Installation
1.
Connect a USB keyboard and mouse to the console ports of the KVM.
2.
Connect the selector pushbutton to the front port of the KVM.
3.
Connect all audio cables to each computer, the KVM, and speakers if necessary.
4.
Connect other USB devices to the USB Hub if necessary.
5.
Connect the DisplayPort monitor to the DisplayPort output of the KVM.
6.
Connect the included DC 5V power adapter to the DC port of the KVM.
7.
Connect the DisplayPort cable between the DisplayPort output of the computer and the DisplayPort input of the
KVM.
8.
Connect the USB cable to the USB-A port of the computer and to the USB-B upstream port of the KVM.
9.
Turn on the computer and make sure that the USB ports are enabled and working properly.
Note
This KVM Switch supports USB plug & play; all the components can be added and removed at any time without the need
to shut down the unit. However, it will take several seconds to enumerate the USB devices; the time depends on the
number of USB devices and the speed of the computer.
Operation
Port Selection
Press the selector button to switch between CPU ports. The button LED indicates the port: white (CPU1) or green (CPU2).
The orange LED on the KVM top also indicates the active host port.
Hotkey Support
The hotkey function is working with a USB keyboard which is plugged in at the front port marked with a keyboard logo.
There is no hotkey support for a USB keyboard plugged into the USB Hub downstream ports of the KVM.
You can select the computer you want to control with the following hot keys.
Channel selection
Press [Ctrl] + [Ctrl] + Enter to switch all channels (PC + USB Hub + Audio) to the next port
Press [Ctrl] + [Ctrl] + [D] + Enter to switch the DP channel (PC only) to the next port
USB Hub Selection
Press [Ctrl] + [Ctrl] + [Z] + Enter to switch the USB hub to the next port.
Audio Selection
Press [Ctrl] + [Ctrl] + [A] + Enter to switch Audio to the next port.
Host USB Power on detect Function
Press [Ctrl] + [Ctrl] + [P] + [W] + [1] to enable port switching by Host USB Power on detect. (Default)
Press [Ctrl] + [Ctrl] + [P] + [W] + [0] to disable Host USB Power on detect.
-3-
