Installation; Installing The Mounting Brackets; Installing The Product - Glacier bay 1002194737 Guía De Instalación Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Installation

1
Marking the mounting location
Remove the set screw (DD) from the base of the
product posts.
Place the product in the desired mounting
location, using a level to position it accordingly,
and use a pencil to lightly mark the outline of the
posts.
Center the mounting bracket (BB) within the
marked post locations, and mark where the
screw holes will be drilled.
Repeat this step as needed for each bath
accessory.
NOTE: The included template (EE) may be used to mark the
mounting locations for the towel bars: A and C for the 18
in. towel bar/ A and D for the 24 in. towel bar or double towel
bar.
3

Installing the product

Place the post (A, C, E, or F) over the mounting
bracket (BB) and secure it with the set
screw (DD), as shown.
Repeat this step for the remaining
post (A, C, E, or F).
NOTE: Ensure the towel bar (B or D) is inserted prior to
securing the second post (A, C, E, or F) to the mounting
bracket (BB).
DD
BB
2

Installing the mounting brackets

Drill 1/4 in. holes in the previously marked
locations.
Push the plastic anchors (CC) flush into the dry wall.
Fasten the mounting bracket (BB) to the wall with
the wood screws (AA).
Repeat this step as needed for each bath
accessory.
NOTE: When mounting the products to a wood wall, fasten
the mounting brackets (BB) to the wall using the wood
screws (AA). There will be no need for drilling or plastic
anchors (CC).
5
Please contact 1-855-HD-GLACIER for further assistance.
CC
AA
BB
AA
BB
BB
DD
HOMEDEPOT.COM
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

65415w-6a04Hd65415w-6127d65415w-6a0110022131521002210019

Tabla de contenido