Idiomas disponibles
Idiomas disponibles
Installation (continued)
6
Power pack installation
□
Hang the power pack (F) on the Phillips screws (AA)
using the keyhole slots on the back and bottom of
the power pack (F).
7
Installing the photo eye holder
□
When selecting a location for the
receive direct sunlight during the
system to shut off unexpectedly.
□
Drill a hole using a 1/4 in. drill bit at the desired location on an outside wall
and insert the anchor (CC). Secure the photocell holder (EE) by inserting the
Phillips screw (BB) through the photocell holder (EE) and into the anchor (CC).
□
Insert the end of the photocell cable (FF) into the photocell socket (EE).
8
Distributing the cable
□
Lay a length of low-voltage cable (G) in the general area where the
along the low-voltage cable.
NOTE:
remote photocell (FF).
9
Connecting the tube and xture housing
□
Attach the tube assembly (B) to the xture housing (A).
photocell cable (FF), make sure it will
day. DO NOT mount the
photocell
6
cable
BB
AA
F
AA
EE
CC
FF
G
FF
10 ft / 3,05 m
A
B
