Ruijie RG-EW300R Manual Del Usuario página 7

The device
connects to the
primary router,
while the network
is unreachable.
Note:
1. The device already in the WPS networking status will not be paired again if you
press the WPS button.
2. You can short press the LED/RESET button ❷ to turn off the LED.
Scenario 3: Connect the Device to the Modem Directly
1.
The device is
starting up
after power-on.
The system status
LED is blinking blue.
Please wait for 1 to 2 minutes.
Power supply faceplate
Operating Status
The device connects
to the network.
The system status LED ❹
is solid red. The signal
status LED ❸ is solid white.
2.
Startup is
complete.
The system status
LED is solid blue.
4.
Connect to the SSID @Ruijie-sXXXX broad-
casted by the Wi-Fi extender and perform
configuration. Please visit 10.44.77.254 by
browser to perform configuration if the configu-
ration page does not pop up.
ISP modem
LED Status
The system status LED
❹ is solid blue.
Please check whether the primary
router accesses the Internet.
3.
Connect to the modem with an
Ethernet cable.
The system status LED is solid blue.
Please connect to the
configured Wi-Fi.
5
Description