Ruijie RG-EW300R Manual Del Usuario página 5

Operating Status
Factory status
The device
accesses
the network
successfully.
The device fails to
connect to the
primary router.
The device connects
to the primary
router,while the
network is
unreachable.
Note:
1. You can download the Reyee Router App to get more management functions of
the extender, such as turning off the signal status LED and modifying the Wi-Fi name
and password.
2. If only one signal bar is on, place the Wi-Fi extender closer to the primary router.
3. You can create a wired network with an Ethernet cable over the 100 Mbps
Ethernet port.
4. The connected Wi-Fi extender can access the Wi-Fi network automatically
upon the next power-on.
5. You can short press the LED/RESET button ❷ to turn off the LED.
LED Status
The system status LED
❹ is solid blue. The
signal status LED ❸ is
off.
The system status LED ❹
is solid blue. The signal
status LED ❸ is solid
white.The more signal bars
in solid white indicates the
stronger signal.
The system status LED ❹
is solid red. The signal
status LED ❸ is off.
The system status LED ❹
is solid red. The signal
status LED ❸ is solid
white.
Description
If the device is still in the factory
status after the configuration of the
Wi-Fi Extender is complete, it indi-
cates that the device is not properly
installed. Please move the Wi-Fi
extender closer to the primary router.
Connect to the SSID @Ruijie-sXXXX
and try again.
The network is reachable. The
Wi-Fi extender and the primary
router broadcast the same Wi-Fi
signal by default. You can also set
different Wi-Fis for the Wi-Fi
extender and the primary router.
Please place the Wi-Fi extender-
closer to the primary router.
Please check whether the primary
router accesses the Internet.
3