Orion CO552 Manual De Instrucciones página 4

What's In The Box
Included in this box are all the necessary mounting hardware and cables for your basic
installation . listed below is a detailed list of the components included in this system package .
Installing Process
The performance of the orion
quality of installation . Care taken during the installation process will be rewarded with years
of satisfying performance . If you are unsure about your installation capabilities, please refer
to your local authorized orion
professionals dedicated to extracting the maximum performance out of your orion
If you decide to install this speaker system yourself, please read the entire installation section
before starting your installation .
Tools Of The Trade
listed are the majority of the tools required to perform the installation . Having the proper tools
will make the installation much easier . It is very difficult when you get half way through the
installation and discover that you require a specific tool to get yourself through a particular part
of the installation . some of these tools are necessities . some make the job much easier .
Finding Speaker Mounting Locations
Choosing the correct speaker locations will have the greatest effect on the sound quality of the
system . Different considerations are needed when choosing the locations that best suit your
2
Model number:
serial number:
Date of Purchase:
Quantity
1
2
2
2
2
2
1
2
Component loudspeaker is directly proportional to the
TM
Dealer for technical assistance . orion
TM
o Marking Pen
o 1/4" Drill bit
o 1/8" Drill bit
o 3/8" Drill bit
o Hole saw arbor
o Wire Crimpers
o 4-3/4" Hole saw (5-1/4" mid/woofer install .)
o 5-5/8" Hole saw (6-1/2" mid/woofer install .)
o 1-7/8"Hole saw (for flush mount tweeter installation .)
Description
Installation and operation Manual
orion Tweeter elements
TM
surface mount hardware
flush mount hardware
orion mid/woofer speakers
TM
Passive crossovers with cables
Mounting template
Grills
Mounting screws
o electric Drill
o Phillips screwdriver
o Volt/ohm Meter (optional)
o needle nose Pliers
o assorted Tin snips
o Wire strippers
© 2012 MD Audio Engineering—all rights reserved
dealers are trained
TM
system .
TM