Idiomas disponibles
Idiomas disponibles
4.
Overview
Refer to the illustrations on page 2 of this manual.
handle
1
on-off switch
2
5.
Assembly
Never touch the nozzle during or immediately after use. The nozzle can be very
Handle
Slide the extension tube into the device as far as possible or until it clicks into
place.
Press the lock button and pull the extension tube out of the device.
The device may only be used with the handles attached.
Nozzle
Slide the protruding points of the weed burner nozzle as far as possible into the
slots of the burner nozzle. Twist the nozzle approximately one centimetre into
the slot. The long side of the cap must be on top (this is the side where the
switch is located).
6.
Operation
A fire may result if the appliance is not used with care. Therefore:
be careful when using the appliance in places where there are
o
combustible materials
do not apply to the same place for a long time
o
do not use in presence of an explosive atmosphere
o
be aware that heat may be conducted to combustible materials, which
o
are out of sight
place the appliance on its stand after use and allow it to cool down before
o
storage
do not leave the appliance unattended when switched on
o
do not allow hot parts of the appliance to touch the cord or other
o
flammable materials.
V. 05 – 18/08/2021
Disconnect the device from the mains before assembly.
Never touch the nozzle during use. The nozzle can be very hot!
Never cover the ventilation openings.
VL108
stand
3
nozzle
4
WARNING
hot!
WARNING
6
©Velleman Group nv
